B&R Automation PC 620, User Manual

Page: 337 / 594

Software • Upgrade information
Section 4
Soft
w
are
337 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
3.5. Upgrade all SDLR (AP800/AP900)
All SDLR controllers are automatically updated on all Automation Panels on the
monitor/panel
(by default, after 5 seconds).
3.6. Return to main menu
Returns to the main menu.
Concerning point 4:
A submenu is opened for upgrading the SDLR controller on the AP Link slot.
4.1. Upgrade SDLR on AP 8 (AP800/AP900)
The SDLR controller is automatically updated on Automation Panel 8.
4.2. Upgrade SDLR on AP 9 (AP800/AP900)
The SDLR controller is automatically updated on Automation Panel 9.
4.3 Upgrade SDLR on AP 10 (AP800/AP900)
The SDLR controller is automatically updated on Automation Panel 10.
4.4 Upgrade SDLR on AP 11 (AP800/AP900)
The SDLR controller is automatically updated on Automation Panel 11.
4.5 Upgrade all SDLR (AP800/AP900)
All SDLR controllers are automatically updated on all Automation Panels on the AP Link slot
(by default, after 5 seconds).
4.6 Return to main menu
Returns to the main menu.
Concerning point 5:
The submenu for the add-on UPS firmware and upgrade and the battery settings upgrade is
opened - this is irrelevant for PPC700 systems.
Concerning point 6:
Returns to the shell (MS-DOS).
Information:
The system must be powered off and on again after a successful controller upgrade.