464
Accessories • Cables
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
12.6.5 Cable connection
The SDL flex cable with extender must be connected between the Industrial PC and Automation
Panel 900 display unit in the correct direction. The signal direction is indicated on the extender
unit for this purpose:
•
Connect the end labeled "SDL IN" with the video output of the Automation PC 620 or
Panel PC 700 (monitor/panel output) or Panel OUT of an AP900 AP Link card.
•
The "SDL OUT" end should be connected to the display unit (e.g. Automation Panel 900)
via the Automation Panel Link insert card (Panel IN).
Figure 216: Example of the signal direction for the SDL flex cable with extender - APC620
Figure 217: Example of signal direction display - SDL flex cable with extender
Automation PC 620
Automation Panel 900
SDL IN
SDL OUT
SDL IN
SDL OUT
SDL OUT
SDL IN
SDL OUT
SDL IN
Automation Panel 900
Automation PC 620
Automation Panel 900
+
Automation Panel Link 5DLSDL.1000-01
SDL OUT SDL IN
SDL OUT SDL IN
on
Panel IN
on
Panel OUT
Summary of Contents for Automation PC 620
Page 2: ...2 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 4: ...4 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 6: ...6 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 568: ...568 Appendix A Glossary Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...