B&R Automation PC 620, User Manual

Page: 417 / 594

Accessories • X2X and CAN plugs (4-pin)
Section 6
Accessories
417 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
3. X2X and CAN plugs (4-pin)
3.1 General information
This 4-pin plug is needed for connecting to the X2X and CAN interface.
3.2 Order data
3.3 Technical data
Model number Description Figure
0TB704.9 4-pin screw clamp
0TB704.9
0TB704.91
0TB704.91 4-pin cage clamps
Table 282: Order data - 0TB704.9 and 0TB704.91
Information:
The following characteristics, features and limit values only apply to this accessory
and can deviate from those specified for the entire device. For the entire device
where this accessory is installed, refer to the data provided specifically for the entire
device.
Name 0TB704.9 0TB704.91
Number of pins 4
Type of terminal Screw clamps Cage clamps
Table 283: Technical data - TB103 supply plug