Baldor MicroFlex e100, Installation Manual

Page: 126 / 172

www.baldormotion.com
A-2 Accessories MN1942
A.1.1 Fan tray
The fan tray (Baldor part FAN001-024) provides sufficient cooling for the 3 A, 6 A or 9 A
MicroFlex
e
100. It requires 23 - 27.5 VDC at 325 mA, which may be sourced from the same
filtered control circuit supply used for the MicroFlex
e
100. The MicroFlex
e
100 is UL listed (file
NMMS.E128059) when used in conjunction with the fan tray, mounted exactly as shown in
Figure 54.
Fan tray
FAN001-024
94
(3.7)
84
(3.3)
66
(2.6)
142.5
(5
.6
)
21.5
(0.
85)
Fan tray
dimensions
16
(0.63)
Bottom of
MicroFlex
e
100
4.5
(0.18)
17.3
(0.
68)
Position of fan tray mounting
holes relative to MicroFlex
e
100
It is important that the fan tray is mounted in
close proximity to the MicroFlex e100 as shown
above. Failure to do so will result in decreased
cooling efficiency.
Fan tray
Assembled MicroFlex
e
100
and fan tray
Figure 54 - Fan tray