Baldor MicroFlex e100, Installation Manual

Page: 11 / 172

www.baldormotion.com
Introduction 2-1 MN1942
2.1 MicroFlex
e
100 features
The MicroFlex
e
100 is a versatile brushless servo drive, providing a flexible and powerful motion
control solution for rotary and linear motors. Standard features include:
H
Single axis AC brushless drive.
H
Range of models with continuous current ratings of 3 A, 6 A
or 9 A.
H
Direct connection to 115 VAC or 230 VAC single-phase or
230 VAC three-phase supplies.
H
Universal feedback interface supporting incremental
encoder, BiSS, SSI, EnDat or SinCos feedback.
H
Position, velocity and current control.
H
Auto-tuning wizard (including position loop) and software
oscilloscope facilities provided by Mint WorkBench
configuration software (supplied).
H
3 optically isolated general purpose digital inputs. Two
inputs have ‘fast input’ capability, providing real-time
position capture.
H
1 optically isolated drive enable input.
H
1 optically isolated general purpose digital output.
H
1 optically isolated digital output to indicate error
conditions.
H
USB 1.1 serial port (compatible with USB2.0).
H
CANopen protocol for communication with Mint controllers
and other third party CANopen devices.
H
ETHERNET Powerlink & TCP/IP support: Twin Ethernet
ports with integrated hub for communication with host PC
or other ETHERNET Powerlink devices.
H
Programmable in Mint.
MicroFlex
e
100 will operate with a large range of brushless rotary and linear servo motors. It can
also operate induction motors using closed-loop vector control. For information on selecting
Baldor servo motors, please see the sales brochure BR1202 available from your local Baldor
representative.
This manual is intended to guide you through the installation of MicroFlex
e
100. The sections
should be read in sequence.
The
Basic Installation
section describes the mechanical installation of the MicroFlex
e
100, the
power supply connections and motor connections. The other sections require knowledge of the
low level input/output requirements of the installation and an understanding of computer software
installation. If you are not qualified in these areas you should seek assistance before proceeding.
2
Introduction
2