BADU Genio, Translation Of The Original Operation Manual

Page: 89 / 276

Installation
09|2019 EN 19
Eco VS
Activate external input on "cl"
GND (black)
X1:1
n1 (brown) Relay 1 (Daughterboard left) closer
n2 (green) Relay 2 (Daughterboard left) closer
n3 (white) Relay 3 (Daughterboard left) closer
Stop (red) Relay 4 (Daughterboard right) opener
Eco Soft
GND (black) X1:1
n1 (brown) Relay 1 (Daughterboard left) closer
n2 (green) Relay 2 (Daughterboard left) closer
n3 (white) Relay 3 (Daughterboard left) closer
Stop (red) Relay 4 (Daughterboard right) opener
Eco Touch Pro
GND (black) X1:1
n1 (brown) Relay 1 (Daughterboard left) closer
n2 (green) Relay 2 (Daughterboard left) closer
n3 (white) Relay 3 (Daughterboard left) closer
Stop (red) Relay 4 (Daughterboard right) opener
Eco Motion
Menu -> Set "Fixed speed digital" and "Continuous" signal
externally
Terminal 50: 24V
X1:1
Terminal 51: In11 Relay 1 (Daughterboard left) closer
Terminal 52: In12 Relay 2 (Daughterboard left) closer
Terminal 53: In13 Relay 3 (Daughterboard left) closer
Terminal 22: S2 Relay 4 (Daughterboard left) closer
pH canister empty message (potential free opener)
Conductor1 X2:3
Conductor2 Input electronic board I02
Chlorine canister empty message (potential free opener)
Conductor1 X2:4
Conductor2 Input electronic board I01
Level switch pool water level (reed contact float switch)
Conductor1 X2:1
Conductor2 Input electronic board I05