BADU Genio, Translation Of The Original Operation Manual

Page: 84 / 276

Installation
14 EN 09|2019
5.2.1 Terminal assignment plan
Operating voltage: 230 V, 50/60 Hz
Fixed wiring is necessary for permanent operation!
Assignment of the output relay RasPl
Motherboard:
Relay 1 (X7:1/2/4) Level potential-free
Relay 2 (X7:11/12/14) Attraction 1 potential-free
Relay 3 (X7:21/22/24) Attraction 2 potential-free
Relay 4 (X6:5) Attraction 3
Relay 5 (X6:4) Floor drain ball valve
Relay 6 (X6:3) Heating
Relay 7 (X6:2) Redox dosing pump
Relay 8 (X6:1) pH dosing pump
Daughterboard:
Relay 1 n1 NO (normally open)
Relay 2 n2 NO (normally open)
Relay 3 n3 NO (normally open)
Relay 4 Stop NC (normally closed)
If a normal AC pump is installed instead of a speed-controlled
pump, the pump must be connected to relay 4 (Stop) as a closer
(NO).