Axel WOLF 1MS, User Manual, Page: 74 / 229

| 74
14.6.4
Deemphasys
The internal tuner-1 Deemphasis value can be set between 50uS or 75uS accordingly to the country/region where the
Wolf 2MS has been installed.
14.6.5
External Attenuator
In order to provide to Wolf 2MS a correct RF input level, in case an external RF attenuator is required, it is necessary to
insert here the same attenuation level introduced by the external RF attenuator.
14.6.6
Global Tuner Mask Mode
By using this settings it is possible to set the behavior of the errors, if these should be masked or not.
Masked
Mask all alarms with priority over any individual configuration. Mask an alarm means
“
NO errors are reported and NO errors are visible on the webpage
”
Unmasked
Unmasks all alarms with priority over any individual configuration. Unmask an alarm
means that “the alarms are
reported and visible on the webpage”
Severity-1
Mask all alarms with severity equal to 1
(The others errors are not masked)
Severity-2
Mask all alarms with severity less than or equal to 2
(The others errors are not masked)
Severity-3 Mask all alarms with severity less than or equal to 3.
Individual
Masking
This parameter allows the user to set for each single parameter under control if the
parameter must be masked or not.