Axel WOLF 1MS, User Manual, Page: 116 / 229

| 116
14.6.34
RDS TMC (Traffic Message Channel)
NAME DESCRIPTION NOTE
Chan
Channel Number
Chan Label
Mnemonic name that can be applied to the Channel / Frequency
Frequency
Frequency corresponding to the Channel, expressed in MHz
Preset
String used by the configurator
Scan Time
This value represents the time in s that the tuner remain on this frequency.
Chan Mask
This control allow (or not) the channel to be under control.
If it is masked,
the channel is
NOT under
control
Timeout Reg and
Timeout Data
Particular attention is placed on TMC and RT+ and in addition two other services
that could also be generic ODA TDC and IH. The Wolf 2MS controls the recording of
the service through the group 3A and monitored the transmission of data over the
corresponding group ODA recorded.
For this purpose are provided two timeout, one on the arrival of logging messages of
the service and one on the packets containing the data.
When you cross the threshold of either an alarm is triggered on the service.
Mask
It is possible to set, for each single parameter: unmasked, masked, severity-1,
severity-2, severity-3, RFL2 mask.
Email
In case the alarm/error raise up, the Wolf 2MS sends an email if <enable>.
If is <disable> no action are taken.
Trap
In case the alarm/error raise up, the Wolf 2MS sends a trap if <enable>.
If is <disable> no action are taken.
Label
This is the label/content that the user can choose to shows via email or in the trap in
case of error.