Axel WOLF 1MS, User Manual, Page: 120 / 229

| 120
Label
This is the label/content that the user can choose to shows via email or in the trap in
case of error.
14.6.38
RDS Group Transmission Alarm
An alarm is now included to monitor the transmitted Rds groups. A mask allows to define all groups present in the
transmission and an alarm is raised if after the timeout one or more groups hasn't been received. The Group Mask is an
32bits integer in HEX. Every bit in this mask is referred to a Rds group. The Group Mask bit0 is the 0A group, the bit1 is
the 0B group, the bit2 is the 1A and so on … . Example: 11 (0A and 2A)
Available the status variable and the trap as well as all parameters to control the state (Timeout, Validation, Hold and
Mask)
1°HEX 1°HEX 5°HEX 3°HEX 7°HEX 2°HEX 6°HEX 4°HEX 8°HEX
HEX=1 HEX=0 HEX=0 HEX=0 HEX=0 HEX=1 HEX=1 HEX=1
1°bit 1°bit 1°bit 1°bit 1°bit 1°bit 1°bit 1°bit 2°bit 2°bit 2°bit 2°bit 2°bit 2°bit 2°bit 2°bit 3°bit 3°bit 3°bit 3°bit 3°bit 3°bit 3°bit 3°bit 4°bit 4°bit 4°bit 4°bit 4°bit 4°bit 4°bit 4°bit
0 0
0 0 0 0 0 0
0 0
0 0 0 0 0 0
0 0
0 0 0 0 0 0
1 0
0 0 0 1 1 1
15B 13B 11B 9B 7B 5B 3B 1B 14B 12B 10B 8B 6B 4B 2B 0B 15A 13A 11A 9A 7A 5A 3A 1A 14A 12A 10A 8A 6A 4A 2A 0A
Example:
Check 11A,7A,5A,1B,1A,0A =0040440D
Check 15A,14A,4A,0A=50000101