Axel WOLF 1MS, User Manual, Page: 109 / 229

| 109
14.6.27
RDS TA (Traffic Announcement)
NAME DESCRIPTION NOTE
Chan
Channel Number
Chan Label
Mnemonic name that can be applied to the Channel / Frequency
Frequency
Frequency corresponding to the Channel, expressed in MHz
Preset
String used by the configurator
Scan Time
This value represents the time in s that the tuner remain on this frequency.
Chan Mask
This control allow (or not) the channel to be under control.
If it is masked,
the channel is
NOT under
control
MaxOn Timeout
When TA is ON for a time greater than
MaxOnTimeout value, an alarm is reported.
If timeout = 0 no alarms are reported
Value
expressed in
Seconds
NoVarTimeout
This parameter launches an alarm if there is not a change in the TA for a certain
period. This NoVarTimeout is useful to monitor the radio stations that are using TA.
Value
expressed in
minutes
Mask
It is possible to set, for each single parameter: unmasked, masked, severity-1,
severity-2, severity-3, RFL2 mask.
Email
In case the alarm/error raise up, the Wolf 2MS sends an email if <enable>.
If is <disable> no action are taken.
Trap
In case the alarm/error raise up, the Wolf 2MS sends a trap if <enable>.
If is <disable> no action are taken.
Label
This is the label/content that the user can choose to shows via email or in the trap in
case of error.