Axel WOLF 1MS, User Manual, Page: 39 / 229

WOLF 2MS GENERAL DESCRIPTION
| WOLF 2MS GENERAL DESCRIPTION 39
b.
Test n°2
-
Using web page move the RF-H1 threshold under the measured value.
-
Verify that the status of D zone shows TUNER ERROR as the photo.
-
Using the Jog Shuttle move the cursor on the display under the memory number
-
Push the Jog Shuttle (To select the function)
-
Now the display (Tuner-1 zone) show the memory and the frequency selected but in the background the
scanning still working.
-
Select the right memory moving the jog shuttle
The D zone shows the list of the all alarms that are present.
-
After 30 seconds the display start again to shows the loop of all memories that are scanned.
D) This zone shows the PS-RDS if PS is present and valid, or NO RDS if it is not valid.
-
Tuner in Static Mode: turning the encoder positioning the index of the channel and pressing it to select the channel, the
list of possible errors is printed in zone D) as a carousel.
-
Tuner Scanning Mode: After selecting the channel as above, turning the encoder you can 'browse through all channels,
checking the status (which is printed in zone D). If there are errors, are printed in the same area of the display as a
carousel.
3)
In case that no alarms are present:
-
The D zone shows the PS-RDS
4)
In case that alarms are present:
-
The D zone shows the list of alarms
c.
Test n°1
-
Using an external RDS Encoder change the PI or using an antenna tune some radio station.
-
Verify that the PS change and correspond to the PS set.
-
In case that there isn’t RDS signal the PS show NO RDS as the photo.
12.4.2
Audio Streaming Module-1 Zone Functionality
E
D) This label show the status of Audio Streaming Module-1:
-
T1, T2, AN, DG: Audio source in streaming