Axel WOLF 1MS, User Manual, Page: 105 / 229

| 105
14.6.23
RDS PS (Program Service)
If the Timeout field is =0, the system compares the received PS with 4 inserted Ref1, Ref2, ref3, Ref4. At least one of the 4 PS
must match to don’t generate an alarm. If no PS (Ref1, Ref2, ref3, Ref4) match an alarm is generated.
If the Timeout field is > 0 the system checks that there is a change of contents of the PS within the time limit specified by the
Timeout field and the 4 PS (Ref1, Ref2, ref3, Ref4) otherwise an alarm is generated.
See next page for particular case and behaviour
NAME DESCRIPTION NOTE
Chan
Channel Number
Chan Label
Mnemonic name that can be applied to the Channel / Frequency
Frequency
Frequency corresponding to the Channel, expressed in MHz
Preset
String used by the configurator
Scan Time
This value represents the time in s that the tuner remain on this frequency.
Chan Mask
This control allow (or not) the channel to be under control.
If it is masked,
the channel is
NOT under
control
Ref 1
PS name 1 to be monitored
See Note1
reported
below
Ref 2
PS name 2 to be monitored
See Note1
reported
below
Ref 3
PS name 3 to be monitored See Note1
reported
below
Ref 4
PS name 4 to be monitored See Note1
reported
below
CharRef
It is possible to configure one “special” character that, in case is present in the Ref
field it is not taken in consideration in the checking.
Timeout
If the Timeout field is > 0 the system checks that there is a change of contents of
the PS within the time limit specified by the Timeout field and the 4 PS
(Ref1, Ref2, ref3, Ref4) otherwise an alarm is generated.
Hold
is the time between the cessation of the alarm condition and alarm signaling finished
Mask
It is possible to set, for each single parameter: unmasked, masked, severity-1,