Axel WOLF 1MS, User Manual, Page: 50 / 229

WOLF 2MS WEB PAGE
| WOLF 2MS WEB PAGE 50
This box displays all the information
regarding the decoding of the data
carrier RDS. If a parameter set in the
section came into error occurs, the
ALARM box will become red. It is possible
to set the
level of the
alarms in
Settings->
Tuner-1 ->
RDS
ODA TMC: If the service is indexed with the AID of the
settings specified on this form is transmitted press OK.
Otherwise, if there is no (or a bit lower timeout)
recording on the 3A writes REG NO. If the data do not
change (not arrive) set out in writing NO DATA. If the
service is completely lacking writes NO SERV. This
applies to TMC, ODA + RT 1 and 2.
ODA RT+: Check the presence or absence of the
service. If the service is indexed with the AID of the
settings specified on this form is transmitted press OK.
Otherwise, if there is no (or a bit lower timeout)
recording on the 3A writes REG NO. If the data do not
change (not arrive) set out in writing NO DATA. If the
service is completely lacking writes NO SERV. This
applies to TMC, ODA + RT 1 and 2.
CT: Check the presence or absence of the service
inside the group 4A. if the parameter match with one
inserted in the check page no alarm will be generated,
if not an alarm will be reported.
Wolf 2MS displays the double buffer. Displays the
buffer is that of the flag A flag B. The bottom line shows
the RT that you are receiving. With each change of flag
A/B copied this comes in the line above and below that
will shape the new RT arrives. In the case of single RT
(or if there is no 'change of flag a / b) after 10 min.
above the line is cleaned.
ODA and ODA-1-2: reports have been inserted equal
to the TMC and RT + on the presence or absence of
the service. If the service is indexed with the AID of the
settings specified on this form is transmitted press OK.
Otherwise, if there is no (or a bit lower timeout)
recording on the 3A writes REG NO. If the data do not
change (not arrive) set out in writing NO DATA. If the
service is completely lacking writes NO SERV. This
applies to TMC, ODA + RT 1 and 2.
Each single web page shows the status or the data coming from the Wolf 2MS for Tuner-1 and Tuner-2. In the main
page it is possible to see the value, but it is not possible to operate because the information can only be viewed. The
single page can shows MAIN - AF01-32 - AF33-64
– EON.