Axel WOLF 1MS, User Manual, Page: 100 / 229

| 100
14.6.19
Audio Right (Silence detector)
This page allows the user to set mainly the silence threshold and timing, for the single Right Channel
NAME DESCRIPTION NOTE
Chan
Channel Number
Chan Label
Mnemonic name that can be applied to the Channel / Frequency
Frequency
Frequency corresponding to the Channel, expressed in MHz
Preset
String used by the configurator
Scan Time
This value represents the time in s that the tuner remain on this frequency.
Chan Mask
This control allow (or not) the channel to be under control.
If it is masked,
the channel is
NOT under
control
Silence Thr
This is the minimum level on the
RIGHT CHANNEL to be considered audio . Under
this threshold the audio is considered “silence”.
Silence Time
This parameter is related to Silence Thr, after this <Silence Time> the incoming
audio is considered “Silence”
Silence Hold
is the time between the cessation of the alarm condition and alarm signaling finished
Silence Mask
It is possible to set, for each single parameter: unmasked, masked, severity-1,
severity-2, severity-3, RFL2 mask.
Silence Email
In case the alarm/error raise up, the Wolf 2MS sends an email if <enable>.
If is <disable> no action are taken.
Silence Trap
In case the alarm/error raise up, the Wolf 2MS sends a trap if <enable>.
If is <disable> no action are taken.
Silence Label
This is the label/content that the user can choose to shows via email or in the trap in
case of error.