Axel WOLF 1MS, User Manual, Page: 138 / 229

TECHNICAL APPENDIX
| TECHNICAL APPENDIX 138
16.3 APPENDIX C
– ETHERNET / LAN CONNECTION
16.4 APPENDIX D
– SERIAL CONNECTION
PORT 1 RDS ENCODER
2 Tx 2 Tx
3 Rx 3 Rx
4 DTR 4 /
5 GND 5 GND
The cable that must be used to connect a RDS UECP encoder to Wolf 2MS must be a straight forward cable. A common
Pin-to-Pin subD 9pole Female-Male. The maximum lengh must be 10mt. This cable can be used between WOLF 2MS
and a RDS Encoder UECP compliant. The RDS data bridging can be achieved by connecting the Serial output from Wolf
2MS to the RDS Encoder data input. Please refer to this user manual and the RDS Encoder user manual to set the
correct speed data and baud rate.
2 2
3 3
4 4
5 5
RS 232 Male
RS 232 Fem ale