Axel WOLF 1MS, User Manual, Page: 144 / 229

TECHNICAL APPENDIX
| TECHNICAL APPENDIX 144
16.8 APPENDIX H
– WOLF 2MS TEST PROCEDURE AND CONSIDERATION
Scope of the test proposal is to verify and test all Wolf2MS functionalities in order to check in detail the behavior of all
equipment. We will split all Wolf2MS functions in three Groups and test every function, checking and comparing the
results with the expected ones in all interfaces available (WEB PAGES, SNMP, Front Panel display and Leds).
For every function an example configuration will be described in a nominal situation, as well as what happens when an
alarm rises up. The expected timing will be indicated with the related measurements and in brief the effects on all
interfaces.
All the tests will be done and the variations explained on all the three possible situations (Static, Scan, SmartScan).
For every function will be indicated if an improvement is planned in the next releases or must considered definitive.
The scope of this test isn't a strict measure sequence, but scan all functionalities together for finding bugs, unexpected
behaviors on one or more interfaces, for enhancing weak and strong point of the system .
So, the test configuration proposed is only an example to follow, the important thing will be for every functionality have a
report about the test results. Every buggy behavior found will be fixed in the next release, every improvement suggested
will be discussed and every limitation found will be defined.