Avermedia NX 8000 series, User Manual

Page: 82 / 201

74
5.3 Recording Setting
In the Recording dialog box, click
OK
to accept the new settings, click
Cancel
to exit without saving,
and click
Default
to revert back to original factory setting.
i
The gray selections are not support for IP camera.
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the
ALL
check box. To select more than one camera,
Right click
on the camera icon. To select one
camera only,
Left click
on the camera icon. The camera icon turns red when it is selected.
(2) Recording Mode
The blocks from 00 to 23 represent the time in 24-hour clock. To record in full 24 hours, select the
recording mode and click the
~ button. If you want to only record at a particular time, click the colored
block beside the recording mode then click on the time blocks.