Avaya J129, Installing And Administering

Page: 31 / 133

Code Parameter
1 Does not set any parameter. The value must be 6889.
2 HTTPSRVR
3 HTTPDIR
4 HTTPPORT
5 TLSSRVR
6 TLSDIR
7 TLSPORT
8 TLSSRVRID
9 L2Q
10 L2QVLAN
11 PHY1STAT
12 PHY2STAT
14 SIG
15 SIP_CONTROLLER_LIST
DHCP site-specific option
You can set the values of site-specific configuration parameters through a DHCP option. The default
DHCP option to set the site-specific configuration parameters is 242. You can also use any option
between 128 to 254. Whichever option you select to specify the site-specific configuration, you must
specify that option number in the Site-Specific Option Number (SSON) parameter. You can set the
SSON parameter through the device interface.
Following is an example of the DHCP 242 option string that specifies the HTTPSRVR and the Voice
VLAN that the device must connect to.
HTTPSRVR=10.138.251.67,L2QVLAN=1104
The following table lists the site-specific configuration parameters that you can define for the device.
Parameter Description
ADMIN_PASS
WORD Security string used to access Admin menu.
The default is 27238. This is meant to replace PROCPSWD as it provides a more secure
password syntax.
HTTPDIR Specifies the path to prepend to all configurations and data files the device might request
when starting up, that is, the path, relative to the root of the HTTP file server, to the
directory in which the device configuration and date files are stored. The path may contain
no more than 127 characters and may contain no spaces. HTTPDIR is the path for all HTTP
operations.
The command is
SET HTTPDIR=<path>
. In configurations where the upgrade and binary
files are in the default directory on the HTTP server, do not use the
HTTPDIR=<path>
.
Table continues…
DHCP options
September 2017 Installing and Administering Avaya J129 IP Phone 31
Comments on this document? infodev@avaya.com