Procedure
1. Press
Main Menu
>
Admin
.
2. In the
Access code
field, enter the admin menu password.
3. Press
Enter
.
4. Select
SSON
.
5. In the
SSON
field, enter the new SSON.
The number must be between 128 to 254.
6. Press
Save
.
Caution:
Do not perform this procedure if you are using static addressing. Perform this procedure
if you are using DHCP addressing and the DHCP option number is changed from the
default number.
Using the VIEW administrative option
About this task
Use this procedure to view the parameters associated with the admin procedures.
Procedure
1. Press
Main Menu
>
Admin
.
2. In the
Access code
field, enter the admin menu password.
3. Press
Enter
.
4. Select
View
.
5. Press
Back
to return to the main menu.
VIEW field description
Setting
Description
Associated Configuration
Parameter
Model
The model of the phone that is set
by factory procedures.
MODEL
Backup SW version
The version of the software
backup.
Gateway
The address of the gateway.
Table continues…
Phone administration and configuration
September 2017
Installing and Administering Avaya J129 IP Phone
66
