Parameter name
Default value
Description
• 1: Proxy server information received from PPM is
not used.
ENABLE_PRESENCE
1
Specifies if presence will be supported.
Value Operation:
• 0: Disabled
• 1: Enabled
Note:
This parameter is set to 0 in IP Office
environment.
ENABLE_REDIAL
Specifies if
Redial
softkey is available.
Value Operation:
• 0: No
• 1: Yes
ENABLE_REMOVE_PSTN_ACCE
SS_PREFIX
Allows phone to perform digit manipulation during
failure scenarios. This parameter allows removal of
PSTN access prefix from the outgoing number.
Value Operation;
• 0: PSTN access prefix is retained in the outgoing
number.
• 1: PSTN access prefix is removed from the
outgoing number.
ENABLE_SHOW_EMERG_SK
2
Specifies whether an
Emergency
softkey, with or
without a confirmation screen, is displayed when
the phone is registered. All emergency numbers
are always supported.
Value Operation:
• 0:
Emergency
softkey is not displayed.
• 1:
Emergency
softkey is displayed without a
confirmation screen.
• 2:
Emergency
softkey is displayed with a
confirmation screen.
Note:
The parameter is set to 0 for IP Office
environment.
ENABLE_SHOW_EMERG_SK_U
NREG
2
Specifies whether an
Emergency
softkey, with or
without a confirmation screen, is displayed when
the phone is not registered.
Table continues…
List of configuration parameters
September 2017
Installing and Administering Avaya J129 IP Phone
100
