Parameter name
Default value
Description
had the last time it successfully registered with a
call server.
While reusing an address, DHCP enters the
extended rebinding state described above for
DHCPSTD.
Valid values are 0 and 20 through 999. The default
value is 60. A value of zero means that DHCP will
try forever and there will be no reuse.
RINGTONES
Null
Specifies a list of display names and file names or
URLs for a custom ring tone files to be downloaded
and offered to users.
The list can contain 0 to 1023 UTF-8 characters.
The default value is null.
Values are separated by commas without any
intervening spaces. Each value consists of a
display name followed by an equals sign followed
by a file name or URL. Display names can contain
spaces, but if any do, the entire list must be
quoted. Ring tone files must be single-channel
WAV files coded in ITU-T G.711 u-law or A-law
PCM with 8-bit samples at 8kHz.
RINGTONESTYLE
0
Specifies the style of ring tones that are offered to
the user for personalized ringing when
Classic
is
selected, as opposed to
Rich
.
Value Operation:
• 0: North American ring tones are offered
(default).
• 1: European ring tones are offered.
RTCP_XR
0
Specifies if VoIP Metrics Report Block as defined in
RTP Control Protocol Extended Reports (RTCP
XR) (RFC 3611) is sent as part of the RTCP
packets to remote peer or to RTCP monitoring
server.
Value Operation:
• 0: No
• 1: Yes
RTCPCONT
Specifies if the sending of RTCP is enabled.
Value Operation:
• 0: No
• 1: Yes
Table continues…
List of configuration parameters
September 2017
Installing and Administering Avaya J129 IP Phone
120
