Parameter name
Default value
Description
PROVIDE_OPTIONS_SCREEN
Specifies if
Options & Settings
menu is displayed
on phone.
Value Operation:
• 0: No
• 1: Yes
PROVIDE_TRANSFER_TYPE
0
Provides the call transfer type in 3rd party
environments.
Value 0 or 1.
PSTN_VM_NUM
Specifies the dialable string that is used to call into
the messaging system. For example, when you
press the
Message Waiting
button.
Note:
This parameter is supported when the phone
is failed over.
Q
R
RDS_INITIAL_RETRY_ATTEMPT
S
15
Specifies the number of retries after which the
phone abandons its attempt to contact the PPM
server.
Valid values are 1 through 30.
RDS_INITIAL_RETRY_TIME
2
Specifies the number of seconds that the phone
waits for the first time before trying to contact the
PPM server again after a failed attempt. Each
subsequent retry is delayed by double the previous
delay.
Valid values are 2 through 60.
RDS_MAX_RETRY_TIME
600
Specifies the maximum delay interval in seconds
after which the phone abandons its attempt to
contact the PPM server.
Valid values are 2 through 3600.
RECORDINGTONE
0
Specifies whether call recording tone is generated
on active calls.
Value Operation:
• 0: Call recording tone is not generated (default).
• 1: Call recording tone is not generated.
RECORDINGTONE_INTERVAL
15
Specifies the number of seconds between call
recording tones.
Valid values are 1 through 60.
Table continues…
List of configuration parameters
September 2017
Installing and Administering Avaya J129 IP Phone
118
