Parameter name
Default value
Description
MYCERTRENEW
90
Specifies the percentage of the identity certificate's
validity interval after which renewal procedure is
initiated.
Valid values are 1 through 99.
MYCERTURL
Null
Specifies the URL of the SCEP server for obtaining
an identity certificate.
The URL can be HTTP or HTTPS.
The valid values can range from Zero to 255 ASCII
characters.
MYCERTWAIT
1
Specifies the phone's behavior if the SCEP server
indicates that the certificate request is pending for
manual approval.
Value Operation:
• 0: Poll the SCEP server periodically in the
background.
• 1: Wait until a certificate is received or the
request is rejected.
N
NO_DIGITS_TIMEOUT
20
Specifies the number of seconds the phone waits
for a digit to be dialed after going off-hook and
before generating a warning tone.
Valid values are 1 through 60.
O
OCSP_ACCEPT_UNK
1
Specifies whether in cases where certificate
revocation status for a specific certificate cannot be
determined to bypass certificate revocation
operation for this certificate.
Value operation:
• 0: Certificate is considered to be revoked if the
certificate revocation status is unknown. TLS
connection will be closed.
• 1: Certificate revocation operation will accept
certificates for which the certificate revocation
status is unknown.
OCSP_CACHE_EXPIRY
2880
Specifies the time interval for the OCSP cache
expiry in minutes. OCSP response cache expiry
uses nextUpdate value in OCSP response
message. If nextUpdate is not present, then
OCSP_CACHE_EXPIRY parameter value is used.
Valid range is from 60 to 10080
Table continues…
September 2017
Installing and Administering Avaya J129 IP Phone
111
