Parameter name
Default value
Description
This parameter is used only for development and
debugging purposes.
EXCHANGE_AUTH_USERNAME
_FORMAT
0
Specifies the necessary format of the username for
http authentication.
Value operation:
• 0: Current format. Username=
<ExchangeUserDomain\ExchangeUserAccount>
or Username= <ExchangeUserAccount> if
<ExchangeUserDomain> is empty.
• 1: Office 365 format. Username=
<ExchangeUserAccount@ExchangeUserDomain
> or Username= <ExchangeUserAccount> if
<ExchangeUserDomain> is empty.
EXTEND_RINGTONE
Null
Provides a way to customize ring tone files.
This is a comma separated list of file names in xml
format.
F
FAILED_SESSION_REMOVAL_TI
MER
30
Specifies the number of seconds the phone
displays a session line appearance and generates
re-order tone after an invalid extension is dialed
and user does not press the
End Call
softkey.
Valid values are 5 through 999.
FQDN_IP_MAP
Null
Specifies a comma separated list of name or value
pairs where the name is an FQDN and the value is
an IP address. The IP address may be IPv6 or
IPv4 but the value can only contain one IP
address. String length is up to 255 characters
without any intervening spaces inside the string.
The purpose of this parameter is to support cases
where the server certificate Subject Common
Name of Subject Alternative Names includes
FQDN, instead of IP address, and the
SIP_CONTROLLER_LIST is defined using IP
address. This parameter is supported with phone
service running over TLS, however, the main use
case is for Avaya Aura SM/PPM services. This
parameter must not to be used as an alternative to
a DNS lookup or reverse DNS lookup.
G
G726_PAYLOAD_TYPE
110
Specifies the RTP payload type to be used for the
G.726 codec.
Valid values are 96 through 127.
Table continues…
List of configuration parameters
September 2017
Installing and Administering Avaya J129 IP Phone
102
