Parameter name
Default value
Description
local numbers with more flexibility. PHNLAC is a
string representing the local area code the phone.
Note:
This parameter is supported when the phone
is failed over.
PHNLD
1
Specifies the long distance access code
Valid values are 0 through 9 and empty string.
If long distance access code is not needed then set
the parameter to null.
PHNLDLENGTH
10
Specifies the national phone number length. For
example, 800-555-1111 has a length of 10.
Valid values are 5 through 15.
PHNMUTEALERT_BLOCK
1
Specifies if the
Mute Alert
feature is blocked or
unblocked.
Value Operation:
• 0: Unblocked
• 1: Blocked
PHNNUMOFSA
3
Specifies the number of session appearances the
phone must support while operating in a non-
Avaya environment.
Valid values are 1 through 10.
PHNOL
9
Specifies the outside line access code. This is the
number you press to make an outside call.
Valid values are 0 to 2 dialable characters (0-9, *,
#).
PHONE_LOCK_IDLETIME
0
Specifies the interval of idle time, in minutes, after
which the phone will automatically lock.
The phone will lock irrespective of the value of
ENABLE_PHONE_LOCK.
PHY1STAT
1
Specifies the speed and duplex settings for the
Ethernet line interface.
Value Operation:
• 1: auto-negotiate
• 2: 10Mbps half-duplex
• 3: 10Mbps full-duplex
• 4: 100Mbps half-duplex
• 5: 100Mbps full-duplex
Table continues…
List of configuration parameters
September 2017
Installing and Administering Avaya J129 IP Phone
114
