Parameter name
Default value
Description
A value of zero means that DHCP tries with a non-
zero VLAN ID forever.
Note:
This parameter is configured through:
• Settings file
• A name equal to value pair in DHCPACK
message
VOLUME_UPDATE_DELAY
2
Specifies the minimum interval, in seconds,
between backups of the volume levels to PPM
service when the phone is registered to Avaya
Aura
®
Session Manager.
If there is no change to volume levels, there will be
no backup to PPM service.
Valid values are 2 through 900. The default value is
2.
W
WAIT_FOR_INVITE_RESPONSE
_TIMEOUT
60
Specifies the maximum number of seconds that the
phone waits for another response after receiving a
SIP 100 Trying response.
Valid values are 30 through 180.
WAIT_FOR_REGISTRATION_TIM
ER
32
Specifies the number of seconds that the phone
waits for a response to a REGISTER request.
If no response message is received within this
time, registration will be retried based on the value
of RECOVERYREGISTERWAIT.
Valid values are 4 through 3600.
WAIT_FOR_UNREGISTRATION_
TIMER
32
Specifies the number of seconds the phone waits
before assuming that an un-registration request is
complete.
Un-registration includes termination of registration
and all active dialogs.
Valid values are 4 through 3600.
WEBLMSRVR
Null
Sets the IP address or Fully-Qualified Domain
Name (FQDN) of the licensing server.
Valid values are zero or more IP addresses in
dotted-decimal or DNS format, separated by
commas without intervening spaces, to a maximum
of 255 ASCII characters.
List of configuration parameters
September 2017
Installing and Administering Avaya J129 IP Phone
130
