Parameter name
Default value
Description
PHY2VLAN
0
Specifies the value of the 802.1Q VLAN ID that is
used to identify network traffic going into and
coming out of the internal CPU of the phone.
Valid values are 0 through 4094.
Note:
The parameter is configured through the
following:
• SET command in a settings file
• LLDP
PKCS12URL
Null
Specifies the URL to be used to download a PKCS
#12 file containing an identity certificate and its
private key. Valid values contain 0 to 255 ASCII
characters, zero or one URL. The value can be a
string that contains either $SERIALNO or
$MACADDR, but it may contain other characters
as well. If $MACADDR is added to the URL, then
the PKCS12 filename on the file server includes
MAC address without colons. PKCS12 file
download is preferred over SCEP if PKCS12URL is
defined.
PKCS12_PASSWD_RETRY
3
Specifies the number of retries for entering
PKCS12 file password. If user failed to enter the
correct PKCS12 file password after
PKCS12_PASSWD_RETRY retries, then the
phone will continue the startup sequence without
installation of PKCS12 file. Valid values are from 0
to 100.
Value operation:
• 0: No retry
PLAY_TONE_UNTIL_RTP
1
Specifies whether locally-generated ringback tone
stops as soon as SDP is received for an early
media session, or whether it will continue until RTP
is actually received from the far-end party.
Value Operation:
• 0: Stop ringback tone as soon as SDP is
received.
• 1: Continue ringback tone until RTP is received
(default).
POE_CONS_SUPPORT
Enables power over Ethernet conservation mode.
Table continues…
List of configuration parameters
September 2017
Installing and Administering Avaya J129 IP Phone
116
