ATIKA MHB 40, Original Instructions Manual

Page: 18 / 192

18
You may not start to operate the machine until you
have read these operating instructions, observed all
the instructions given and installed the machine as
described!
Keep the instructions in a safe place for future use.
Contents
Extent of delivery 18
EC Declaration of Conformity 18
Symbols on the machine / original instructions 19
Operating times 19
Proper use 19
Residual risks 20
Vibrations (hand-arm-vibrations) 20
Safety Precautions 20
−
Personal protective equiment
20
− Safety instructions – before working
21
− Safety instructions – operating
21
− Safety instructions – while working
21
− General safety instructions
21
− Safety instructions for the hoeing machine
22
− Behaviour in an emergency situation
22
− Safe handling with fuels 22
Description of device / spare parts 22
Assembly 23
Preparing for startup
23
−
Engine oil
23
−
Gasoline
23
Start-up 24
− Starting with cold engine
24
− Stopping the engine
24
− Starting with warm engine
24
Before start of work
25
Working with the hoeing machine
25
− Adjustments
25
− Work instructions 25
− Start of work 25
Maintenance and cleaning 26
−
Checking/changing the gear oil level
26
−
Change engine oil
26
−
Cleaning the air filter 27
−
Adjusting the clutch cable
27
−
Clean or replace the fuel filter 27
−
Checking/replacing the spark plug 27
−
Checking the ignition spark 28
−
Silencer 28
−
Adjusting the carburetor (idle speed) 28
−
Cleaning 28
Transport 28
Storage 28
Guarantee 28
Maintenance and cleaning schedule
29
Possible faults 30
Technical specifications 31
Extent of delivery
After unpacking, check the contents of the box for
!
completeness
!
possible transport damage.
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
•
1 Basic unit
•
1 Transport wheel
•
2 Hoeing tools
•
1 Steering handle RH/LH
•
1 Console
•
1 Cover
•
1 Hoeing spur
•
1 Tool bag containing
-
1 Open-end wrench (size 14 and 17)
- 1 Phillips screwdriver
- 1 Spark plug socket spanner
•
1 Original operating instruction manual
•
1 Assembly and operating instruction sheet
•
1 Warranty declaration
EC Declaration of Conformity
No. (S-No.): 14136
Ö
MHB 40
14143
Ö
MHB 60
according to EC directive: 2006/42/EC
We,
ATIKA GmbH
Josef-Drexler-Str. 8, 89331 Burgau - Germany
herewith declare under our sole responsibility that the products
MHB 40 / MHB 60 motor hoe
Serial Number: 000001 - 020000
are conform with the above mentioned EC directives as well as
with the provisions of the guidelines below:
2004/108/EC and 2000/14/EC.
Following harmonized standards have been applied:
EN 709:1997+A4:2009; EN ISO 14982:2009
Conformity Assessment Procedures:
(2000/14 EEC) - Appendix VI
MHB 40 MHB 60
Measured sound power level L
WA
91,4 dB (A) 92,5 dB (A)
Guaranteed sound power level L
PA
93 dB (A) 93 dB (A)
Duly authorised person for the complilation of technical
documents:
ATIKA GmbH – Technical department – Josef-Drexler-Str. 8 –
89331 Burgau – Germany
i.A.
Burgau, 17.12.2014
i.A. G. Koppenstein,
Engineering design management