Asus DS300 G2 Series, User Manual

Page: 64 / 262

DS300f G2 Series User Manual
58
S
huttInG
D
own the
S
ubSyStem
This function shuts down the RAID subsystem without restarting it.
To shutdown the subsystem:
1. Click the
Administration
tab.
2. Click the
Subsystem Information
icon.
3. Choose the option to apply the shutdown to the
Subsystem
,
Controller 1
only
or
Controller 2
only
4. Click the
Shutdown/Restart
button.
5. Click the
Shutdown
button.
6. Type the word “
confirm
” in the field provided.
7. Click the
Confirm
button.
When the controller shuts down, your ASUS Storage Management connection is lost.
8. Wait at least two minutes.
Important
If your RAID subsystem manages JBOD expansion units, you must follow the proper startup
procedure.
r
eStartInG the
S
ubSyStem after a
S
hutDown
To start the RAID subsystem:
1. Press the Power button on the front left side of the device being restarted.
2. Wait at least two minutes.
3. Open your browser and log into ASUS Storage Management.
If you cannot log in immediately, wait 30 seconds and try again.
M
anaGInG
raId C
ontrollers
RAID controller management includes:
• "Viewing Controller Information" on page 58
• "Making Controller Settings" on page 59
• "Locating a Controller" on page 60
• "Viewing the Flash Image Information" on page 60
• "Viewing Battery Information" on page 62
• "Reconditioning a Battery" on page 62
• "Silencing the Buzzer" on page 63
v
IewInG
c
ontroller
I
nformatIon
To view controller information:
1. Click the
Device
tab.
2. Click the
Component List
icon.
3. Click the controller you want, then click the
View
button.
Controller information includes:
• Controller ID
• Readiness Status
• Power On Time
• LUN Mapping method
• Serial Number
• Hardware Revision
• Cache Usage – Percentage
• Boot Loader Version
• Firmware Build Date
• Software Build Date
• Alias – If assigned *
• Operational Status
• SCSI Protocol Supported
• Part Number
• WWN – World Wide Name
• Dirty Cache Usage – Percentage
• Firmware Version
• Software Version