Asus DS300 G2 Series Page 241 User Manual Download

Page: 241 / 262

DS300f G2 Series User Manual

235

ppendIx

b: M

ultIpathInG

Indows

The appendix covers the following topics:

•

Before You Begin

•

Installing PerfectPath

• Verifying Installation

•

Running Perfect Path View

• Monitoring Your LUNs and Paths

•

Features and Settings

•

Troubleshooting

•

Updating PerfectPath

•

Repairing PerfectPath

• Removing PerfectPath

PerfectPath is a multipathing software designed for use with ASUS Storage ASUS DS300f G2 RAID subsystem

products and includes:

• GUI – Graphic user interface, PerfectPath View, for easy monitoring and settings.

• DSM – Device-Specific Module driver.

• Events Service

– Notification service posts events to the application log.

PerfectPath supports Fibre Channel and Serial Attached SCSI (SAS) technologies.

PerfectPath runs on Windows Server 2008 and 2008 R2 operating systems, on both x86 and x64 platforms.

For a list of supported OSes, download the latest compatibility list from ASUS Storage support: http://www.

ASUS Storage.com/support/.

efore

eGIn

Before you install PerfectPath on your Windows Host PC, you must:

• Install your Fibre Channel or SAS HBA cards and their device drivers.

• Close all computer and storage management applications, including Computer Management, Device

Manager, Disk Management, and the Registry Editor.

Note

If you have a complex configuration, such as multiple HBAs connected with multiple LUNs

and paths to your PC, installation can take a long time. You can choose to temporarily

disconnect your storage, install PerfectPath, then reconnect your storage to reduce

installation time.

Summary of Contents for DS300 G2 Series







































































































































































































































































Search results

Summary of Contents for DS300 G2 Series

Reviews:

Related manuals for DS300 G2 Series

Brands by name

Popular brands

Asus DS300 G2 Series, User Manual

Search results

Summary of Contents for DS300 G2 Series

Reviews:

Related manuals for DS300 G2 Series

Brands by name

Popular brands