Asus DS300 G2 Series User Manual Download Page 259

Page: 259 / 262

DS300f G2 Series User Manual

253

1. Copy the ASUS Storage-supplied multipath.conf file to the /etc directory.

#> cp multipath.conf.alua-sles11sp1 /etc multipath.conf

2. Check the multipath configuration.

chkconfig multipathd on

chkconfig multipathd

(shows the status of multipathd)

3. Reboot the ASUS DS300f G2.

4. Check the multipath configuration.

Multipath -ll (multipath -v4)

ibre

hAnnel

hbA

Asus ds300

If you plan to use connect a Fibre Channel HBA card to ASUS DS300f G2 RAID subsystem, you must change

the remote port (rport) configuration.

1. Change the dev_loss_tmo value as large as possible.

Example: 0x7fffffff.

2. Change the fast_io_fail_tmo value as 30.

rpM p

aCkaGes

and

oCuMents

for

Inux

MpIo

ASUS Storage provides RPM packages and multipath.conf files for Linux on the support: http://www.ASUS

Storage.com/support/.

A ASUS Storage Linux package contains:

• package folder – RPM packages for the Linux OS

• multipath-conf folder

• ALUA folder – Configuration file and instructions for ALUA, if supported
• normal folder – Configuration file for general multipathing

Important

Please read the

How to Configure

document in the ALUA folder for the latest information before

beginning your setup.

•

The table below lists the content of each ASUS Storage Linux package:

Package

Folder

Contents

SLES10-SP2

normal

multipath.conf-ASUS DS300f G2-normal-sles10-sp2

SLES10-SP3

package

multipath-tools-0.4.7-34.50.10.ass.fix.i586.rpm

multipath-tools-0.4.7-34.50.10.ass.fix.x86_64.rpm

ALUA

multipath-conf-ASUS DS300f G2-alua-sles10-sp3

How to Configure MPIO SLES10 SP3.doc

normal

multipath-conf-ASUS DS300f G2-normal-sles10-sp3

SLES11

packages

multipath-ASUS Storage-suse11-0.4.8-i586.rpm

multipath-ASUS Storage-suse11-0.4.8-x86_64.rpm

ALUA

multipath-conf-ASUS DS300f G2-alua-sles11

How to Configure MPIO SLES 11.doc

normal

multipath-conf-ASUS DS300f G2-normal-sles11

SLES11-SP1

packages

scsi_dh_alua_sles11sp1-2-1.i586.rpm

scsi_dh_alua_sles11sp1-2-1.x86_64.rpm

scsi_dh_alua_sles11sp1-2-1.src.rpm

ALUA

multipath.conf.alua-sles11sp1

How to Configure MPIO SLES 11sp1.doc

normal

multipath.conf-ASUS DS300f G2-normal-sles11sp1

How to Configure MPIO SLES 11sp1.doc

RHEL-5.3

normal

multipath.conf-ASUS DS300f G2-normal-rhel5-3

Summary of Contents for DS300 G2 Series







































































































































































































































































Search results

Summary of Contents for DS300 G2 Series

Reviews:

Asus DS300 G2 Series, User Manual, Page: 259 / 262

Search results

Summary of Contents for DS300 G2 Series

Reviews: