Asus DS300 G2 Series Page 258 User Manual Download

Page: 258 / 262

DS300f G2 Series User Manual

252

#> uname -a

Do one of the following actions:

• Remove the currently installed multipath tool.

rpm -ev multipath-tools

Install the appropriate new multipath-tool RPM package.
i586

rpm -ivh multipath-tools-0.4.7-34.50.10.ass.fix.i586.rpm

x86_64

rpm -ivh multipath-tools-0.4.7-34.50.10.ass.fix.x86_64.rpm

• Force install the appropriate new multipath-tool RPM package.

i586

#> rpm -ivh -force multipath-tools-0.4.7-34.50.10.ass.fix.i586.rpm

x86_64

#> rpm -ivh -force multipath-tools-0.4.7-34.50.10.ass.fix.x86_64.rpm

3. Copy the ASUS Storage-supplied multipath.conf file to the /etc directory.

#> cp multipath.conf-ASUS DS300f G2-alua-sles10-sp3 /etc multipath.conf

4. Check the multipath configuration.

chkconfig multipathd on

chkconfig multipathd

(shows the status of multipathd)

chkconfig boot.multipath on

chkconfig boot.multipath

(shows the status of boot.multipath)

5. Reboot the ASUS DS300f G2.

6. Check the multipath configuration.

Multipath -ll (multipath -v4)

Se l

Inux

SleS 11

To support ALUA within SLES 11:

1. Determine your system architecture, i586 or x86_64.

#> uname -a

2. Install the appropriate path priority tool library.

• i586

#> rpm -ivh multipath-ASUS Storage-suse11-0.4.8-1.i586.rpm

• x86_64

#> rpm -ivh multipath-ASUS Storage-suse11-0.4.8-1.x86_64.rpm

3. Copy the ASUS Storage-supplied multipath.conf file to the /etc directory.

#> cp multipath.conf-ASUS DS300f G2-alua-sles11 /etc multipath.conf

4. Check the multipath configuration.

chkconfig multipathd on

chkconfig multipathd

(shows the status of multipathd)

5. Reboot the ASUS DS300f G2.

6. Check the multipath configuration.

Multipath -ll (multipath -v4)

Se l

Inux

SleS 11 SP1

Not updated with Novell SP1 patches

If you did NOT update with Novell SLES 11 SP1 patches:

1. Determine your system architecture, i586 or x86_64.

#> uname -a

2. Install the appropriate patched scsi_dh_alua.ko device handler.

• i586

#> rpm -ivh --force scsi_dh_alua_sles11sp1-2-1.i586.rpm

• x86_64

#> rpm -ivh --force scsi_dh_alua_sles11sp1-2-1.x86_64.rpm

3. Copy the ASUS Storage-supplied multipath.conf file to the /etc directory.

#> cp multipath.conf.alua-sles11sp1 /etc multipath.conf

4. Check the multipath configuration.

chkconfig multipathd on

chkconfig multipathd

(shows the status of multipathd)

5. Reboot the ASUS DS300f G2.

6. Check the multipath configuration.

Multipath -ll (multipath -v4)

PdAted

with

ovell

sP1

PAtches

If you updated with Novell SLES 11 SP1 patches:

Summary of Contents for DS300 G2 Series







































































































































































































































































Search results

Summary of Contents for DS300 G2 Series

Reviews:

Related manuals for DS300 G2 Series

Brands by name

Popular brands

Asus DS300 G2 Series, User Manual

Search results

Summary of Contents for DS300 G2 Series

Reviews:

Related manuals for DS300 G2 Series

Brands by name

Popular brands