Associated Research OMNIA II 8204, Operation And Service Manual

Page: 125 / 264

119
and any toggle field that use words or phrases like "OPEN", "CLOSE". The LS2?
companion command will also list all parameters in complete text as they appear on
the setting screen.
ACW DCW IR
1 Voltage Voltage Voltage
2 HI-Limit T HI-Limit HI-Limit
3 HI-Limit R LO-Limit LO-Limit
4 Ramp Up Ramp Up Ramp Up
5 Dwell Time Dwell Time Dwell Time
6 Ramp Down Ramp Down Delay Time
7 Arc Sense Charge-LO Ramp Down
ACW DCW IR
8 LO-Limit T Arc Sense Charge-LO
9 LO-Limit R Offset DUT Output
1
10 Offset Ramp HI Scanner
2
11 Frequency Arc Detect
12 Arc Detect Continuity (ON/OFF)
13 Continuity (ON/OFF) DUT Output
1
14 DUT Output
1
Scanner
2
15 Scanner
2
GND CONT RUN LCT
1 Current HI-Limit Voltage-HI Leakage-HI
2 Voltage LO-Limit Voltage-LO Leakage-LO
3 HI-Limit Dwell Amp-HI Voltage-HI
4 LO-Limit Offset Amp-LO Voltage-LO
5 Dwell Scanner Dwell Time Dwell Time
6 Offset Continuity Delay Time Delay Time
7 Scanner Leakage-HI LCT Offset
8 Frequency Leakage-LO Neutral (OPEN/CLOSED)
9 Dual-Chek Power-HI Reverse (ON/OFF)
10 Power-LO Ground (OPEN/CLOSED)
11 PF-HI Meas. Device
(UL544NP/UL544P/IEC60
601UL2601/
UL1563/IEC60990FIG4-
U2/ IEC60990FIG5-U3/
EXTERNAL/Frequency
Check)
12 PF-LO Probe
(Ground To Line/ Probe-
HI to Line/Probe-HI To
Probe-LO)
13 Active Link Leakage Mode
(Peak/RMS)
14 PLC Control Active Link