Arctic Cat ZR 6000 R CROSS COUNTRY, Operator'S Manual

Page: 84 / 108

80
FS337
FS339
11. Remove the relief screw from the IFP. Discard the
relief screw O-ring, IFP O-ring, and the IFP strap.
FS338
12. Clean and dry the IFP; then secure the shock body
eyelet in the vise. Do not over-tighten the vise.
FS340
13. Using a 5/8-in. socket, remove the damping
adjuster cartridge; then clean and inspect the
inboard and outboard O-rings.
FS292A

NOTE: At this point, inspect the re-flow check
valve for smooth operation and for not being bent
or deformed.
FS380A
14. Install the cartridge; then tighten to 20 ft-lb.
FS381
15. Clamp the shaft eyelet securely in vise with the
piston end up.
CAUTION
Care must be taken not to scratch the cartridge when
removing O-rings.