Arctic Cat ZR 6000 R CROSS COUNTRY, Operator'S Manual

Page: 86 / 108

82
FS351
5. Place the shock body and eyelet in the vise with
the open end directed up.
6. Fill the reservoir with Shock Oil (p/n 5639-240)
until approximately 3/4 full.

NOTE: Allow a few minutes for oil to overflow
into the shock body.
FS352
7. Turn the damping adjuster to the fully closed posi-
tion (clockwise); then refill the reservoir until
approximately 3/4 full.
FS353
8. Lightly grease the IFP; then slowly insert the IFP
into the reservoir and press until the IFP is level
along the flat end of the reservoir.
FS354
9. Install Floating Piston Location Gauge (p/n 0644-
350) and cover the top of the tool with a towel; then
slowly press the IFP into the oil until fully covered.
FS355
FS356
10. Install the IFP relief screw making sure to seat the
relief screw O-ring. Do not tighten.
FS357