Arctic Cat ZR 6000 R CROSS COUNTRY, Operator'S Manual

Page: 67 / 108

63
F
9. Press down on the reservoir end cap; then using a
scribe or a pick tool, remove the reservoir snap
ring. Pull the end cap out of the reservoir.
G
H
10. Using a 5/64-in. hex key, carefully loosen the
bleed set screw; then remove the ball bearing and
set it aside.
I

NOTE: It is advisable to use a small magnet to
remove the ball bearing from the hole.
J
11. Using an appropriate bearing head removing tool,
unscrew the bearing head assembly from the shock.
K
12. Grasp the EVOL chamber end (bottom) of the
shock; then gently pull the piston/shaft/bearing/
EVOL free from the shock body. Set this entire
assembly aside.