Arctic Cat ZR 6000 R CROSS COUNTRY, Operator'S Manual

Page: 75 / 108

71
CCC
DDD
3. Using a shock absorber hand air pump, apply light pres-
sure to the reservoir to extract the IFP.
EEE
4. Pour approximately 2 cc of float fluid into the res-
ervoir (down its side) to provide lubrication for
installing the IFP.
FFF
5. Replace the IFP seal; then amply lubricate the IFP and
place it into the reservoir.
GGG
6. Thread the EVOL reservoir onto the rebound eyelet; then
tighten to 12 ft-lb.
Assembling Shaft Assembly
1. With the shaft assembly clamped in the vise, install the
bottom-out bumper.
HHH
2. Place the Bearing Cap Seal Protector (p/n 0644-
268) onto the shaft, amply lubricate the protector,
and install the bearing assembly onto the shaft.