Arctic Cat ZR 6000 R CROSS COUNTRY, Operator'S Manual

Page: 83 / 108

79

NOTE: At this point, remove the set screw and
discard the valve plug. Always install a new plug
when servicing the shock absorber.
4. Depress the reservoir end cap and remove the end
cap retaining ring.
FS331
5. Using a 3/8-24 cap screw, remove the reservoir
end cap from the reservoir; then discard the end
cap O-ring.
FS378
6. Loosen and unscrew the bearing assembly from
the shock body.
FS333
7. Slowly remove the shaft assembly from the shock
body and place it on a clean, lint-free rag or towel.
FS334
8. Remove the shock from the vise and pour shock
oil into a proper disposal container. DO NOT
REUSE OLD SHOCK OIL.
FS335
9. Secure the shock body eyelet in the vise with the
open end of the reservoir directed up. Turn the
damping adjuster to the fully open position (coun-
terclockwise).
FS384A
10. Using Piston Location Tool (p/n 0644-169),
remove the IFP from the shock body. Place the IFP
on a clean, lint-free rag or towel. Discard excess
reservoir oil.