Arctic Cat ZR 6000 R CROSS COUNTRY, Operator'S Manual

Page: 81 / 108

77
JJJJ
KKKK
18. Using an appropriate inflation needle, charge the
reservoir to 250 psi (p/n 3703-064/065).
19. Using an appropriate strap wrench, tighten the air
sleeve into the rebound eyelet assembly.
LLLL
20. Using a high-pressure hand air pump, pressurize
the shocks to 200 psi EVOL and 80 psi Main.
MMMM
NNNN
Rear Suspension
The Sno Pro 600 is equipped with a compression adjust-
able remote reservoir shock in the rear suspension sys-
tem. This system utilizes front arm limiter straps.
The suspension should be adjusted for the operational
needs and riding preference of the operator.
The rear springs influence the load carrying capability
of the snowmobile and should be adjusted for the
weight and riding preference of the operator.
Rear Arm Shock Rebound
The rear arm shock can be adjusted for rebound quali-
ties. To adjust, use the following procedure.
1. Turn the adjuster clockwise until it stops (hard
position).
2. Turn the adjuster counterclockwise to the initial
setting (see appropriate Valve Stacks/Specifica-
tions page in this manual) or turn the adjuster
counterclockwise the desired number of “clicks.”

NOTE: On the rear arm shock, the rebound
adjuster has a total range of 18 “clicks” or 4 1/2 full
turns (4 “clicks”= 1 turn).