Arctic Cat 2014 XF 2-STROKE, Service Manual

Page: 84 / 196

81
FS220A

NOTE: When installing the lower check valve,
assure that the gaskets are installed on each side of
the valve.
FS235A

NOTE: After the oil pump has been secured, assure
that the oil hoses from the pump to the intake flanges
are routed properly.
9. Place the impeller into position and secure with a cap
screw and washer. Be sure the rubber side of the
washer is directed towards the impeller. Apply blue
Loctite #243 to the threads of the cap screw and
tighten to 48 in.-lb.
XM112
10. Apply sealant to the crankcase seam; then install the
alignment pins into the crankcase (if removed).
XM112A
11. Position the O-ring into the water pump cover; then
install the cover. Install the cap screws; then using
the pattern shown, tighten to 96 in.-lb.
0742-257
12. Secure the hoses to the water pump cover.
Water Pump (6000)
DISASSEMBLING

NOTE: The engine must be removed for this proce-
dure.

NOTE: A bleed hole is located in the crankcase
beneath the water pump housing. If any signs of cool-
ant or oil leakage from the bleed hole exist, the seals
must be replaced.
CWI-094A