111
XM043A
10. Remove the two cap screws (A) and one Allen-head
screw (B) securing the starter motor to the starter
motor mounting bracket. Remove the starter.
XM044A
11. If the starter motor is being replaced, remove the
snap ring securing the starter motor gear to the starter
motor shaft. Remove the gear.
XM041A
REMOVING (6000)
1. Remove the seat and disconnect the battery; then
remove the hood and both access panels.
2. Remove all springs securing the expansion chamber
and resonator; then remove the expansion chamber
and resonator.
3. Remove the two screws (A) securing the heat shield
to the chassis; then remove the heat shield from the
two front locating pins (B) and remove the heat
shield.
EL-001A
4. Disconnect the ECM; then remove the screws secur-
ing the right and left-side fascia panels to the chassis.
Remove the panels and ECM as an assembly.
EL-002A
5. Remove the cap screws and lock nuts securing the
shock mount bracket support to the shock mount
brackets; then remove the shock mount bracket sup-
port.
EL-003A
6. Remove idle speed control (ISC) hoses (A) from the
top of the throttle bodies; then disconnect the ISC
from the main harness (B). Remove the screws (C)
securing the ISC; then remove the ISC.
Summary of Contents for 2014 XF 2-STROKE
