180
EEE
4. Pour approximately 2 cc of float fluid into the reservoir
(down its side) to provide lubrication for installing the IFP.
FFF
5. Replace the IFP seal; then amply lubricate the IFP and
place it into the reservoir.
GGG
6. Thread the EVOL reservoir onto the rebound eyelet; then
tighten to 12 ft-lb.
Assembling Shaft Assembly
1. With the shaft assembly clamped in the vise, install the
bottom-out bumper.
HHH
2. Place the Bearing Cap Seal Protector (p/n 0644-268) onto
the shaft, amply lubricate the protector, and install the
bearing assembly onto the shaft.
III
3. Install the lower and upper shim stack/piston assembly.
Summary of Contents for 2014 XF 2-STROKE
