Arctic Cat 2014 XF 2-STROKE, Service Manual

Page: 37 / 196

34
32. Check drive belt deflection (see the Drive Train/
Track/Brake Systems section).
33. Place the hood into position on the front end and
secure with the screws; then install the hood harness.
Install the side access panels.
34. Start the engine and warm up to operating tempera-
ture; then verify that all components are functioning
properly and that coolant is circulating through the
cooling system properly.
35. After running the engine to the proper operating tem-
perature, shut the engine off; then open the access
panels and inspect for any signs of coolant, gasoline,
or oil leakage.
36. Allow the engine to cool; then check the coolant
level and add coolant as necessary. Verify the tight-
ening torque of the drive clutch.
CAUTION
Never run the engine with the hood harness discon-
nected or damage to the electrical system will result.
CAUTION
If the engine had a major overhaul or if any major com-
ponent was replaced, proper engine break-in proce-
dures must be followed (see the General Information
section) or severe engine damage may result.