APRILIA DORSODURO 1200 ABS - ATC Service Station Manual Download

Page: 329 / 408

Shock absorbers

EAR

SUSPENSION

pos.

Description

Type

Quantity

Torque

Notes

Upper TCEI mounting screw

M10x50

50 Nm (36.88 lbf ft)

Lower TCEI mounting screw

M10x80

50 Nm (36.88 lbf ft)

Removing

•

Place the optional under-sump and rear wheel service stands.

•

Unscrew and remove the upper screw and collect the washer.

•

Loosen the under-sump optional serv-

ice stand to lower the engine.

•

Unscrew and remove the lower screw

and retrieve the nut.

•

Remove the shock absorber.

DORSODURO 1200 ABS - ATC

Suspensions

SUSP - 329

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Summary of Contents for DORSODURO 1200 ABS - ATC

























































































































































































































































































































































































































Search results

Summary of Contents for DORSODURO 1200 ABS - ATC

Reviews:

Related manuals for DORSODURO 1200 ABS - ATC

Brands by name

Popular brands

APRILIA DORSODURO 1200 ABS - ATC, Service Station Manual

Search results

Summary of Contents for DORSODURO 1200 ABS - ATC

Reviews:

Related manuals for DORSODURO 1200 ABS - ATC

Brands by name

Popular brands