APRILIA DORSODURO 1200 ABS - ATC Service Station Manual Download

Page: 396 / 408

•

Disconnect the two breather tubes on

the right side.

•

Remove the tank.

Instrument cluster support

•

Working on both sides, loosen the nuts

and screws and remove everything.

•

Disconnect the connectors of arrow in-

dicators, headlamps, ignition switch

assembly and relay.

•

Remove the three screws that fix the

instrument panel.

Bodywork

DORSODURO 1200 ABS - ATC

BODYW - 396

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Summary of Contents for DORSODURO 1200 ABS - ATC

























































































































































































































































































































































































































Search results

Summary of Contents for DORSODURO 1200 ABS - ATC

Reviews:

Related manuals for DORSODURO 1200 ABS - ATC

Brands by name

Popular brands

APRILIA DORSODURO 1200 ABS - ATC, Service Station Manual

Search results

Summary of Contents for DORSODURO 1200 ABS - ATC

Reviews:

Related manuals for DORSODURO 1200 ABS - ATC

Brands by name

Popular brands