manualshive.com logo in svg

APRILIA DORSODURO 1200 ABS - ATC, Service Station Manual

Share
Download
APRILIA DORSODURO 1200 ABS - ATC Service Station Manual Download Page 224

•

Heat the magneto flywheel with the

specific heater.

•

Unscrew and remove the six screws.

•

Remove the bearing retainer and bear-

ing from the magneto flywheel.

See also

Magneto flywheel removal

Installing the flywheel

•

Insert the woodruff key on the crank-

shaft.

•

Insert the start-up transmission gear

after applying a layer of grease.

Engine

DORSODURO 1200 ABS - ATC

ENG - 224

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Summary of Contents for DORSODURO 1200 ABS - ATC

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands