APRILIA DORSODURO 1200 ABS - ATC Service Station Manual Download Page 359

Page: 359 / 408

Front brake calliper

RONT

BRAKE

pos.

Description

Type

Quantity

Torque

Notes

Union with breather (fixing pipe to

callipers)

M10x1

25 Nm (18.44 lbf ft)

TEFL screw (Fixing calliper to fork

stems)

M10x1.25

50 Nm (36.88 lbf ft)

Loctite 270

Front brake pads

Removal

•

Turn the pins and remove both split

pins.

•

Remove both pins.

•

Collect the anti-vibration springs.

•

Extract one pad at a time.

CAUTION

DORSODURO 1200 ABS - ATC

Braking system

BRAK SYS - 359

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Summary of Contents for DORSODURO 1200 ABS - ATC

























































































































































































































































































































































































































Search results

Summary of Contents for DORSODURO 1200 ABS - ATC

Reviews:

Brands by name

Popular brands

APRILIA DORSODURO 1200 ABS - ATC, Service Station Manual

Search results

Summary of Contents for DORSODURO 1200 ABS - ATC

Reviews:

Brands by name

Popular brands