manualshive.com logo in svg

APRILIA DORSODURO 1200 ABS - ATC, Service Station Manual

Share
Download
APRILIA DORSODURO 1200 ABS - ATC Service Station Manual Download Page 245

•

Unscrew and remove the chain inter-

mediate gear pin.

•

Pay attention to avoid damaging the O-

ring.

•

Remove the primary gear following the

explanation given on crankcase open-

ing.

•

Remove the mobile chain slider.

•

Remove the primary gear following the

explanation given on crankcase open-

ing.

•

Remove the intermediate gear with

chain.

NOTE

IT IS ADVISABLE TO MARK THE CHAIN IN ORDER TO EN-
SURE THAT THE INITIAL DIRECTION OF ROTATION IS
MAINTAINED.

See also

Splitting the

crankcase halves

•

Unscrew and remove the two external

head fixing screws.

DORSODURO 1200 ABS - ATC

Engine

ENG - 245

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Summary of Contents for DORSODURO 1200 ABS - ATC

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands