APRILIA DORSODURO 1200 ABS - ATC Service Station Manual Download

Page: 252 / 408

•

Remove the primary gear following the

explanation given on crankcase open-

ing.

•

Remove the intermediate gear with

chain.

NOTE

IT IS ADVISABLE TO MARK THE CHAIN IN ORDER TO EN-
SURE THAT THE INITIAL DIRECTION OF ROTATION IS
MAINTAINED.

•

Remove the mobile chain slider.

See also

Splitting the

crankcase halves

•

Unscrew and remove the two external

head fixing screws.

•

Unscrew and remove the external

screw on the flywheel side.

Engine

DORSODURO 1200 ABS - ATC

ENG - 252

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Summary of Contents for DORSODURO 1200 ABS - ATC

























































































































































































































































































































































































































Search results

Summary of Contents for DORSODURO 1200 ABS - ATC

Reviews:

Related manuals for DORSODURO 1200 ABS - ATC

Brands by name

Popular brands

APRILIA DORSODURO 1200 ABS - ATC, Service Station Manual

Search results

Summary of Contents for DORSODURO 1200 ABS - ATC

Reviews:

Related manuals for DORSODURO 1200 ABS - ATC

Brands by name

Popular brands